Wuhan Guide IR136 Bedienungsanleitung PDF herunterladen (Seite 19)

User Manual

! When viewing the live image, you can still use the buttons to control the camera.

! After viewing the live image, power off the camera, monitor (or recording device) and disconnect the cable.

Note:

It is required to power off the camera before connecting it to a monitor or a recording device.

Transferring Data from the Camera to PC

• Before transferring data from the SPI® RAZ-IR MAX camera to PC, ensure that the PC offers USB2.0 interface

and the USB driver for the camera has been successfully installed in the PC.

• Power on the camera.

• Press the softkey labeled “File” to reveal the menu “Storage”.

• Press the softkey labeled “"” and “$” to select “Storage”, and “OK” to confirm.

• Press the softkey labeled “UFlash” to select the storage medium as UFLASH. Press the softkey labeled “SD Card”

to select the storage medium as SD Card.

• If the storage medium is set as “UFLASH”, no hint will display on either the PC or the SPI® RAZ-IR MAX screen.

Image export, image analysis, live video recording etc. can be done in the PC. Images saved in UFLASH can be

transferred to PC via IrAnalyser.

• If SD card is inserted in SPI® RAZ-IR MAX , the PC will identify the SPI® RAZ-IR MAX as a removable hard disk,

you can copy the saved data to PC or delete them from the card, or even format the SD card and etc. But you

cannot operate on it in the Guide IrAnalyser software.

• If without SD card in SPI® RAZ-IR MAX , you have to install the camera USB Driver to PC, and use the Guide

IrAnalyser software to transfer images to PC.

Install USB driver to PC

When there is no menu in the live thermal image, properly connect the USB interfaces of the camera to a USB2.0 port

of your PC with the USB extension cable.

Microsoft® Windows launches a Found New Device Wizard to guide you to install the driver as follows:

1 2 ... 14 15 16 17 18 19 20 21 22

Keine Kommentare

Wuhan Guide IR136 Bedienungsanleitung Seite 19